Compatible Spare Parts for the Rangemaster Belfast BridgeTBL3

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Belfast-BridgeTBL3TA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£9.99 Tuesday
Belfast-BridgeTBL3TA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£9.99 Tuesday
Belfast-BridgeTBL3TA-PPair (1 x red, 1 x blue)1/2" Cartridge x 28 x 54mm£19.98 Tuesday
Belfast-BridgeTBL3TA-PWBPair of Cartridges + Set of Bushes1/2" Cartridge x 28 x 54mm£29.00 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK15-SSingleSpout O' Ring Kit£6.99 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
ST17-SSingle17mm spanner£6.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday
SB27-SSingle27mm adaptor bush£7.94 Tuesday
SR63CB-SSingleAerator brushed chrome£6.99 Tuesday
SR63C-SSingleAerator chrome£6.60 Tuesday


RANGEMASTER BELFAST BRIDGE TBL3 TAP SPARES
Tap Magician Compatible Replacement parts to fit the Rangemaster Belfast Bridge Kitchen Mixer tap TBL3 with lever handles.


If your tap is dripping from the spout then you will need to replace the cartridges / Valves (Known by spare part 1427R).
Cartridge has 28 teeth on spline. Hot and cold compatible valves available.
You will require our Clockwise open cartridge for the cold side, and Anti-clockwise open for the hot side.
If you require both then you can select "Pair".
If you do not know which side is leaking you will need to replace both the hot and the cold.
Compatible with the Chrome, Brushes Chrome, White and Black lever models.

When you remove your old Cartridge / Insert the bush (original part 3868R) usually remains inside the tap block however
sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them.
If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 3644R / 1506R.

Replacement aerator available

How to remove the handle:
Unscrew the handle retaining screw with an appropriate size allen key and pull handle away.
You will then need to unscrew the shroud anticlockwise to reveal the cartridge.

How do I replace the tap cartridge?
First make sure you turn the water off.
Use 17mm or adjustable spanner to undo cartridge anticlockwise.
Fit new cartridge (clockwise) and replace the tap handle.

You can find the Rangemaster Belfast Bridge tap diagram / instructions below.


Frequently asked questions about your Rangemaster Belfast Bridge tap.

How to identify my Rangemaster tap? How to repair my leaking Rangemaster Belfast Bridge tap?
Spares available for Rangemaster Belfast Bridge.
Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.