Compatible Spare Parts for the Teka Cedar Monobloc

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Cedar-MonoblocTA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£10.70 Today
Cedar-MonoblocTA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£10.70 Today
Cedar-MonoblocTA-PPair (1 x red, 1 x blue)1/2" Cartridge x 28 x 54mm£21.40 Today
Cedar-MonoblocTA-PWBPair of Cartridges + Set of Bushes1/2" Cartridge x 28 x 54mm£29.86 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SH59C-SSingleChrome Handle Compatible 3529R£16.00 Today
SH59CB-SSingleBrushed Nickel Handle Compatible 3529R£18.00 Today
SK18-SSingleSpout O Ring Repair Kit£5.60 Today
SB27-SSingle27mm adaptor bush£7.94 Today
SL05-SSingleLubricant£3.50 Today
SK01-SSingleSet of Allan Keys£1.99 Today
SR63C-SSingleAerator chrome£6.60 Today
SR63CB-SSingleAerator brushed chrome£6.99 Today


TEKA CEDAR
Replacement Spare parts for the Teka Cedar twin lever Kitchen Mixer monobloc Tap.

Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic cartridge


If your tap is leaking or dripping from the spout then its time to change the ceramic quarter turn cartridges.
Replacement cartridge known by spare part code 3561R / 2552R 2552R-H 2552R-C

You may need a conversion bush but you wont know this until you remove the valve from the tap. Sometimes the bush remains in the tap and other times it comes out stuck to the cartridge. If they come out together you can try and separate the bush which means you can re use the bush. If you cannot get it apart then you will need to purchase a new bush. You can return any unused parts to us.
Adaptor bush known by spare part code 3868R

If your tap is leaking at the neck (this is where the swivel spout joins on to the tap body) then you need to replace the Spout seals. The Seals/O'ring kit is known by code 1260R. You must use silicone lubricant on the new O Rings when fitted.

We supply the compatible 1263R aerator

We now sell new lever handles. Please note they are plain and do not have H / C on them. They are compatible with part 3259R. They come with screws. If you need a screw on its own you can order SS81-S

Teka Cedar Frequently asked questions

How to I remove the Teka Cedar tap handle/lever?
Use 2mm allen key to undo handle. The grub screw is located on the underside of the handle. You can pull the lever forwards to access the screw at the back if you need more space.

How do I know if need the adaptor bush?
Until you remove the cartridge from the tap you will not know if you need this part. This is because sometimes the bush gets corroded to the tap and remains in the tap body, and other times it comes out corroded to the tap cartridge.

Can I remove the adaptor bush from the old cartridge?
Yes you can but it can be very hard to remove due to corrosion. You can try using very hot water, followed by cold water over it, to help break the corrosion seal. The bush unscrews from the cartridge anticlockwise. You will likely ed to use some grips or put it in a vice to remove it. If you cannot separate it you will need to replace the bush.

How do I remove the spout and replace the o'rings inside the spout?
Use 2.5mm allen key to undo grub screw at the back holding the spout in place. pull spout up and out of the tap body. You can watch our How to video above.

What size spanner do I need to remove the cedar tap cartridge?
You will need a 17mm or an adjustable spanner
You can find the cedar tap / instruction diagram below.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.