RANGEMASTER AQUACLASSIC 1 TACT 1 TAP SPARES

Replacement spare parts for the Rangemaster leisure Aquaclassic 1 TAC 1 tap TAC1CM .
Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.

If your tap is Rangemaster 1TAC1 dripping or leaking out of the spout then it is time to replace / change the compression valve.
Original spare part code is 1290R SP1290 and is compatible from 2004 models onwards.

If your tap is leaking at the base of the spout you need to replace the spout seals.
Oring kit known by spare part code 1239R.

If you need a complete replacement spout our spout SPOUT01C is compatible with 1292R / 1292R CH (ours has a plain aerator on the end of the spout).
Available only in chrome.

If you require a new antisplasher / aerator we have a compatible part but it is not the same shape as your original part.
Replacement spare part code SR36C-S (Chrome) and SR63CB-S (Brushed Chrome).

How do I remove the handle and replace the internal cartridge on the 1TAC1 tap?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove tap indice screw cap cover. This will prise off.
Step 2. Remove the handle retaining screw with crosshead screwdriver.
Step 3. Pull handle away from tap body.
Step 4. Unscrew decorative tap shroud. This will unscrew anticlockwise.
Step 5. Use a spanner to remove the tap cartridge.

How to remove the spout and replace the spout o'rings?
Unscrew locking collar at base of spout. Pull spout up and away from tap body.

If you need new handles you can purchase our complete reviver kit which consists of ceramic 1/4 turn cartridges and new handles and shrouds.
Available in chrome as Q152HW-PH10.

You can find the Aquaclassic-1-TAC1 tap / instruction diagram below.