RANGEMASTER AQUAMIX 1 TAM 1 TAP SPARES
Replacement Cartridges to fit the Rangemaster leisure Aquamix 1 TAM 1 /TAM1 Kitchen Mixer Tap from 2004 onwards.
If your tap is dripping or leaking out of the spout then it is time to replace / change the gland.
Cartridge has 24 teeth on spline. Valve opens anticlockwise.
Original spare part codes known by 1254R SP1254.
For guidance / instructions of how to replace a tap valve step by step please
click here
If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1239R.
If you need a new complete spout this is our code SPOUT01C and comes complete with aerator and o rings.
Please note our spout is a tall swan neck style spout.
If you need a replacement aerator this is our SRBLK-S, which is compatible with 133.0068.760 / 1256R.
How to remove my Aquamix tap head / handle?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the end screw cap cover
Step 2. Use a crosshead screwdriver to undo the handle retaining screw screw
Step 3. Pull off the lever handle
Step 4. Use 17mm or adjustable spanner to undo cartridge anticlockwise
Step 5.Screw in the new cartridge clockwise
Step 6. Tighten the cartridge enough to seal, but avoid over-tightening
How do I remove the spout?
Unscrew locking nut at the base of the spout. Pull spout up and out of tap body.
You can find the Aquamix tap diagram/instructions below.
Any further questions contact our experienced technical team.