San-Marco Portland Spare Parts PortlandSV BFC27423 1

Compatible Spare Parts for the San Marco Portland

Please select from the available product options shown below

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
PortlandSV-S	Single	BSP 1/2" x 24spline Compression valve	£12.00		Monday
PortlandSV-2	Two singles	BSP 1/2" x 24spline Compression valve	£24.00		Monday

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
SRBLK-S	Single	Male Thread 24mm Black	£4.40		Monday
SK22-S	Single	Spout O ring repair kit	£5.00		Monday
SL05-S	Single	Lubricant	£3.50		Monday
ST17-S	Single	17mm spanner	£6.50		Monday
STBOX-S	Single	Cartridge Removal Box Spanner 14 / 17mm	£9.50		Monday
ST0TTK-S	Single	Monobloc Tap Tightening Spanner Set	£10.50		Monday

SAN MARCO PORTLAND TAP SPARES
Replacement spares to fit the San Marco portland tap with traditional screw down tap gland.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the gland.
Original spare part codes known bySMR1856

Cartridge has 24 teeth on spline. Valve opens anticlockwise.

How to remove handle and change valve:
Unscrew the end cap / indice from end of handle.
Unscrew screw using a crosshead or slotted screwdriver and remove the handle.
Undo valve cover / shroud anticlockwise.

How to remove the spout and replace the o'rings:
Unscrew the spout locking collar and pull the spout vertically away from the body.
If you need a replacement aerator this is our SRBLK-S, which is compatible with 133.0068.760 / 1256R

This may be called a traditional screw down / full turn / rubber washer valve / headwork.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.