SAN MARCO VENICE TAP SPARES
Replacement spares to fit the San Marco Venice tap with crosshead handles.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the gland.
Original spare part codes known by 1290R SP1290.

Cartridge has 24 teeth on spline. Valve opens anticlockwise.

If your tap is leaking around the neck (where the spout connects to the body) then you need new o rings.
Original o'ring code known by 1239R.

If you need a complete spout we have a tall swan neck spout available in chrome (SPOUT01C-S)

How to remove handle and change valve:
Unscrew the end cap / indice from end of handle.
Unscrew screw using a crosshead or slotted screwdriver and remove the handle.
Undo valve cover / shroud anticlockwise.

How to remove the spout and replace the o'rings:
Unscrew the spout locking collar and pull the spout vertically away from the body.
Remove and replace with our SK22-S o'ring kit.
Remember to grease the O-rings thoroughly with silicone grease.

Replacement aerator insert compatible with 1317R (insert only)

You can find the Veince tap diagram / instructions below.
This may be called a traditional screw down / full turn / rubber washer valve / headwork.