sales@tapmagician.co.uk 01444871313

Trade Registration | Shopping Basket 0

Compatible Spare Parts for the CDA TC30

Please select from the available product options shown below
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
TC30SV-SSingleBSP 1/2" x 24spline Compression valve£9.99 Monday
TC30SV-2Two singlesBSP 1/2" x 24spline Compression valve£19.98 Monday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK22-SSingleSpout O ring repair kit£5.00 Monday
SL05-SSingleLubricant£3.50 Monday
ST17-SSingle17mm spanner£6.50 Monday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Monday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Monday


Replacement Cartridges to fit the CDA TC30 Kitchen tap.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the gland. This may be known as a traditional screw down rubber washer valve. Original spare part codes known by 1254R SP1254.

Cartridge has 24 teeth on spline. Valve opens anticlockwise.

If your tap is leaking around the neck (this is where the spout connects to the tap block) then you need to replace the spout seals/ O Rings.
O Ring Kit is known by part 1239R.

How To remove the handle on the TC30 tap model: Using a small flat screwdriver or fingernail lever dust cap away from the handle. Unscrew screw using a crosshead or slotted screwdriver. Pull the handle and cap horizontally away from the tap body.

How to remove the spout on the TC30 tap model: You need to unscrew the locking nut at the base of the spout. You need to use silicone lubricant on the new Orings when fitted.

You can find the TC30 tap diagram/instructions below.


Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.