Compatible Spare Parts for the Franke Professional Monobloc

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
ProfMonSV-SSingleBSP 1/2" x 24spline Compression valve£9.99 Tomorrow
ProfMonSV-2Two singlesBSP 1/2" x 24spline Compression valve£19.98 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK22-SSingleO' Ring Tap Repair Kit£5.00 Tomorrow
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Tomorrow
ST17-SSingle17mm spanner£6.50 Tomorrow


Replacement spares to fit the Franke Professional monobloc tap production dates 1992 – Oct 2002.

The Valve has 24 spline.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the gland. This may be known as a traditional screw down rubber washer valve. Original spare part codes known by 1290R SP1290

Cartridge has 24 teeth on spline. Valve opens anticlockwise.

If your tap is leaking around the neck (this is where the spout connects to the tap block) then you need to replace the spout seals/ O Rings.
O Ring Kit is known by part 1239R.

How To remove the handle on the Professional tap model: Using a small flat screwdriver or fingernail lever dust cap away from the handle. Unscrew screw using a crosshead or slotted screwdriver. Pull the handle and cap horizontally away from the tap body.

How to remove the spout on the Professional tap model: You need to unscrew the locking nut at the base of the spout. You need to use silicone lubricant on the new Orings when fitted.

You can find the Professional tap diagram/instructions below.


Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.