LAMONA ANTIQUE TAP SPARES
Spare parts to fit the Howdens Lamona Antique TAP3812 and TAP3801 Kitchen Mixer Monobloc tap.

If your tap is dripping or leaking out of the spout then it is time to replace / change the gland.
This may be known as a traditional screw down rubber washer valve. Original spare part codes known by 1290R SP1290.

Cartridge has 24 teeth on spline. Valve opens anticlockwise.

If your tap is leaking from the neck (where the spout meets and joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a suitable silicone grease.
Our SK15-S is compatible with the original codes known by 3646R.

If you need a new antisplasher / spout aerator this is compatible with 3649R available in brushed nickely or shiny chrome.

How to remove handle and change valve:
Remove the indicies / dust cap by hand. Unscrew the crosshead screw then pull the handle away from the tap body.
Unscrew shroud anticlockwise.

How to remove the Spout and replace o-rings?
Unscrew the spout locking collar / nut at the base of the spout anticlockwise.
Once loose, pull the spout up and out of the tap body.

You can find the Antique tap diagram/instructions below.

Frequently asked questions about your Lamona Antique tap.

How to identify my Lamona tap? How to repair my leaking Lamona Antique tap?
Spares available for Lamona Antique.
Any further questions contact our experienced technical team.