ABODE ATLAS SINGLE LEVER TAP SPARES
Tap Magician Compatible Replacement Ceramic tap cartridge to fit the Abode Atlas single lever tap.

If your tap is dripping or leaking out of the spout then it is time to replace / change the cartridge.
Original spare part known by code 1202R / 1484R / ASSLC0001.

Compatible with models AT1092, AT1093, AT2101, AT2102.

If your tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O Rings inside the spout.
Our spout repair kit is compatible with the 1425R.

If you require a new antisplasher / aerator / flow restrictor this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 1263R / SP1263. Your original part may have Neoperl stamped around the edge.

How to remove the abode atlas tap head / handle and replace the valve:
First you will need to unscrew the vertical handle lever to expose the grub screw.
Loosen the grub screw using an 2mm allen key and pull horizontally away from the tap body.
Hold the tap firmly at the base and unscrew the valve locking nut using a spanner.
Remove the spacing washer from the valve and remove the valve from tap body.

How to remove the spout and replace orings:
Loosen grub screw on the rear of body using a 2.5mm allen key.
Pull the spout up out of the tap body and remove orings.
When you replace the new rubber seals they need greasing with a silicone grease (SL05-S).

You can find the Abode Atlas single lever tap diagram / instructions below.
Watch our video below for guidance / how to change your Abode Atlas single lever kitchen tap.