COOKE & LEWIS RENO TAP SPARES
Tap Magician compatible spares / parts to repair the Cooke & Lewis B&Q Reno Kitchen Swan Neck tap 072017 tap.
Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic cartridge.
Please be aware there are many other manufacturers which have identical looking taps which take a different size valve so if you have identified just by a photo online this may not be the right part.
If you are not certain you have the Cooke and Lewis Reno please send us a photograph of the cartridge removed from the tap for us to identify and confirm which size you need.
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original Cartridge may have BS5412 XZ 20 stamped around the edge. Hot and cold valves available.
We recommend you also purchase the new handle adaptor. We cannot guarantee the original handle adaptor will fit our spline.
This blue handle carrier has 32 teeth.
**PLEASE NOTE Due to the way the handles operate please note you will require our Clockwise open RED cartridge for the cold side,
and the Anticlockwise (blue) for the hot side, If you require both then you can select "Pair".
If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber o'rings they need greasing with a potable silicone grease.
If you require a new antisplasher /aerator this is our part SR63C (Chrome).
You can find the Reno tap diagram below.
How to remove the Cooke & Lewis Reno handle and replace the cartridge:
Before replacing the cartridge you will need to turn the water off.
1. Use 2.5mm allen key to undo screw on the back of the handle.
2. Pull handle off.
3. Use adjustable spanner or our STBOX to undo cartridge. It will unscrew anticlockwise.
4. Fit new cartridge screwing in clockwise.
5. Replace handle.
Replacement handle screw available as our SS04-S.