Tap Magician compatible spares / parts to repair the Francis Pegler Brita Ceto 3-Way Kitchen Filter Monobloc tap 4B8020 / 4B8021.
For guidance / instructions of how to replace a tap valve step by step please
click here
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges, hot and cold valves available.
Cartridge has 20 teeth on spline. You will require our Anti-clockwise open cartridge for the cold and Filter side, and clockwise open for the hot side, If you require all 3 then you can select "Triflow pack".
Please note your original cartridge may have an additional spline adaptor which you will need to remove and fit to the new cartridge.
If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease.
Aerator /end diffuser nozzle available in chrome SR01TF or brushed SR01TFCB
Now available internal Brita black filter pipe available as SRHOSE-S.
How To remove the handle and replace the cartridge:
Turn water off before starting steps.
1. Remove the grub screw on the underside of the handle with a 3mm allen key.
2. Once you have removed the allen screw pull the handle away from the tap.
3. Unscrew cartridge with 17mm spanner unscrewing anticlockwise.
4. Fit new cartridge screwing in clockwise and tighten with spanner.
5. Refit handle.
How to remove the spout: Use 2mm allen key to undo spout. Pull spout up and away from body. (replacement screw is available SS81-S)
You can find the Ceto tap diagram/instructions below