Tap Magician compatible spares / parts to repair the Pegler Brita Titanium 3-Way Kitchen Filter Monobloc tap 4B8050.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges, hot and cold valves available

Cartridge has 20 teeth on spline. You will require our Anticlockwise open cartridge for the cold and Filter taps, and clockwise open for the hot side, If you require all then you can select "Triflow Pack"

Please note your original cartridge may have an additional spline adaptor which you will need to remove and fit to the new cartridge

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease.

Aerator /end diffuser nozzle available SR01TF-S.

Now available internal Brita black filter pipe available as SRHOSE-S.

Compatible replacement tap base ring / plinth available (flat not domed) SF032-S)

How To remove the handle and replace the cartridge:
Turn water off before starting steps.
1. There will be a grub screw on the underside of the handle. You will need a 2mm Allen Key to remove the handle (SK01-S).
2. The handle will then pull off.
3. Use 17mm Spanner (STBOX-S) to undo cartridge anticlockwise
4. Fit new cartridge in clockwise.
5. Refit handle.
Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings