REGINOX ELBE COMPATIBLE KITCHEN TAP SPARES
Tap Magician compatible spare parts to repair the Reginox Elbe Traditional Dual Lever Kitchen Tap Mixer 4R1103, ELBE-CH, ELBE-CH-II.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.

If your Reginox Elbe tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side,
If you require both then you can select "Pair".
Longer screws available as SS12-T.

If your tap is leaking at the base of the spout you will need new o rings. Please note our O rings are only suitable for tap model 4R1103 and will not fit older versions.

Replacement compatible Lever Handles available as SH20CER-II.

Replacement aerator insert available as SR00.

How to remove the Elbe tap handle lever and replace the cartridge?
1. Remove end cap and undo screw with crosshead screwdriver.
2. Pull Lever off.
3. Unscrew cartridge cover / shroud (anticlockwise).
4. Use 17mm or STBXOX-S to undo the cartridge (it will unscrew anticlockwise).
5. Fit new cartridge and replace the tap handle.

How do I replace the spout o rings?
1. Use 2.5mm allen key (SK01-S) to undo grub screw at the back of the spout.
2. Pull spout up and away from tap body.
3. Remove old o rings.
4. Apply silicone grease to new o rings.
5. Push spout firmly back in to tap body and tighten grub screw.

You can find the Elbe tap diagram/instructions below.

How to identify my Reginox tap? How to repair and fix my leaking Reginox tap?
Spares available. Elbe tap gland. Elbe Tap Inserts.

Any further questions contact our experienced technical team.