Compatible Spare Parts for the Pegler Ceto 3way

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Ceto-3wayQA-ABAnticlockwise (to open) blue1/2" x 20 x 53mm£9.99 Today
Ceto-3wayQA-CRClockwise (to open) red1/2" x 20 x 53mm£9.99 Today
Ceto-3wayQA-PPair (1 x red, 1 x blue)1/2" x 20 x 53mm£19.98 Today
Ceto-3wayQA-3Triflow pack(1 x red, 2 x blue)1/2" x 20 x 53mm£29.97 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK23-SSingleO' Ring Tap Repair Kit£5.99 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
ST17-SSingle17mm spanner£6.50 Today


Tap Magician compatible spares / parts to repair the Francis Pegler Brita Ceto 3-Way Kitchen Filter Monobloc tap 4B8020 / 4B8021.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges, hot and cold valves available.

Cartridge has 20 teeth on spline. You will require our Anti-clockwise open cartridge for the cold and Filter side, and clockwise open for the hot side, If you require all 3 then you can select "Triflow pack".

Please note your original cartridge may have an additional spline adaptor which you will need to remove and fit to the new cartridge.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease.

How To remove the handle: Remove the grub screw on the underside of the handle with a 3mm allen key. Once you have removed the allen screw pull the handle away from the tap.

You can find the Ceto tap diagram/instructions below



Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.