Compatible Spare Parts for the Franke Davos_NS-1990

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Davos_NS-1990P2-ABAnticlockwise (to open) blue1/2" x 18 x 53mm NTC£10.99 Tomorrow
Davos_NS-1990P2-CRClockwise (to open) red1/2" x 18 x 53mm NTC£10.99 Tomorrow
Davos_NS-1990P2-PPair (1 x red, 1 x blue)1/2" x 18 x 53mm NTC£21.98 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK25-SSingleSpout O' Rings£4.49 Tomorrow
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Tomorrow
SL50-SSingleRegin Grease 50ml£9.99 Tomorrow
ST17-SSingle17mm spanner£6.50 Tomorrow
SS06-SSingleM5 x 6mm round head grub screw£3.49 Tomorrow

Tap Magician compatible spares / parts to repair your Franke Davos Kitchen tap mixer monobloc tap.

Replacement cartridges for the pre 2007 (NS) model of the The cartridge has 18 splines.

Franke Spare part codes M4721 / M4720 / R9742P.1760C / 133.0069.407 / 133.0069.408

This does not fit the Post 2007 davos models (J and SM) if you have one of these versions you can find the correct cartridge by clicking here

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by M4721 / M4720 / R9742P.1760C / 133.0069.407 / 133.0069.408, hot and cold valves available

This does not fit the Post 2007 davos models (J and SM) if you have one of these versions you can find the correct cartridge by clicking here

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease.

How to remove the handle on Franke Davos NS tap: Remove the screw cover cap from the end of the handle. This will reveal the screw. You will need a crosshead screwdriver to remove the screws. The handle will then pull off.

How to remove the spout: Use 2.5mm allen key to undo screw holding spout on (at the back of the spout). Pull spout out of tap body. Replace o'rings and apply silicone grease. If you need a new spout screw this is our SS06.

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings



Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.