Compatible Spare Parts for the Caple Knightsbridge Traditional BR13

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
KNTBR13Q1-ABAnticlockwise (to open) blue1/2" Cartridge x 20 x 54mm £14.99 Tomorrow
KNTBR13Q1-CRClockwise (to open) red1/2" Cartridge x 20 x 54mm £14.99 Tomorrow
KNTBR13Q1-PPair (1 x red, 1 x blue)1/2" Cartridge x 20 x 54mm £29.98 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SL05-SSingleLubricant£3.50 Tomorrow
ST17-SSingle17mm spanner£6.50 Tomorrow
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tomorrow
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tomorrow


CAPLE KNIGHTSBRIDGE BR13 TAP SPARES
Replacement Ceramic cartridges for the Caple Knightsbridge Kitchen Mixer Tap K/BRI3/CH.


For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping you need to replace the ceramic disc quarter turn cartridges inside.
You will need our Red clockwise for your cold side, and our Blue anti-clockwise for the cold side.
Hot and cold available.
They are easy to replace yourself with just a spanner and a screwdriver.

FAQ

How do I remove the handle on my knightsbridge traditional kitchen mixer BR13 bridge tap?

Step 1. Remove hot and cold indice.
Step 2. Use crosshead screwdriver to undo the screw and pull the lever off.
Step 3. Unscrew the shroud. The shroud will unscrew anti-clockwise.
Step 4 You can then use the spanner to undo the cartridge anti-clockwise from the tap.

You can find the Knightsbridge Bridge tap diagram/instructions below.
Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.