Compatible Spare Parts for the Carron Phoenix Henley

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
HenleyMV-CRClockwise (to open) red39mm Mini Valve£12.99 Tuesday
HenleyMV-ABAnticlockwise (to open) blue39mm Mini Valve£12.99 Tuesday
HenleyMV-PPair (1 x red, 1 x blue)39mm Mini Valve£25.98 Tuesday
HenleyMV-PTPair with fitting tool39mm Mini Valve£35.97 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR22X-SSingleAerator chrome F22x1 12 L/Min£6.99 Tuesday
SK22-SSingleSpout O ring repair kit£5.00 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
ST03-SSingleBox spanner for Mini Valve£9.99 Tuesday
SK01-SSingleSet of Allan Keys£1.99 Tuesday
SS81-SSingleM4 stainess grub screw for Handle£3.00 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday

CARRON PHOENIX HENLEY TAP SPARES
Replacement Ceramic tap cartridges and o'ring spare parts compatible with the Carron Phoenix Henley tap.


Watch our help video below for guidance on how to change your quarter turn ceramic valves and spout O-rings.
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by ASCDV0009 / 3794R / SP3794/ 3794R / SP3308 / 3308R.
Hot and cold valve replacements available.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
You can purchase replacement screws for the handle, this is our SS81-S.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1239R / SP1239.

If you require a new antisplasher aerator this is our part SR22X-S (available in Chrome).
Original codes known by 133.0068.762 SP1263 /1263R. Your original part may have Neoperl stamped around the edge.

How to remove your cartridge?
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body.
The old valve may have two flats instead of a hex nut. Our tool has two ends.
One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

How to remove my Henley tap head/handle?
Remove the handle retaining screw by using a 2mm allen key. You can then remove the handle.
Then use an adjustable spanner to remove the valve and fit the replacement parts.

How do I remove the spout and replace the o rings?
Step 1. Unscrew locking collar at the base of the spout. Once unscrewed the spout will pull up and out of the tap body.
Replace the O rings applying silicone grease to the new o'rings before refitting.

Frequently asked questions about your Carron Phoenix Henley tap.

How to identify my Carron Phoenix tap? How to repair my leaking Carron Phoenix Henley tap?
Spares available for Carron Phoenix Henley.
Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.