Compatible Spare Parts for the Franke Wave

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
WaveMV-CRClockwise (to open) red39mm Mini Valve£10.99 Tuesday
WaveMV-ABAnticlockwise (to open) blue39mm Mini Valve£10.99 Tuesday
WaveMV-PPair (1 x red, 1 x blue)39mm Mini Valve£21.98 Tuesday
WaveMV-PTPair with fitting tool39mm Mini Valve£31.97 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SA03-SSingleHandle Adaptor & Screw £3.50 Tuesday
ST03-SSingleBox spanner for Mini Valve£9.99 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
SL50-SSingleRegin Grease 50ml£9.99 Tuesday
SS04-SSingleM5 handle grub screw£3.00 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday

Watch our video below for guidance / how to change your Quarter turn ceramic valves. The video was done on the Franke Bern but the handles are the same.


Tap Magician compatible spares / parts to repair the Franke Wave pull out Kitchen mixer tap 115.0277.034.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by SP3308, 3308R, SP3794 3794R, 133.0358.055, 133.0358.053 133.0150.220, 133.0150.219, hot and cold valves available

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"
Your tap handle may utilise a plastic handle adaptor / tap head carrier. Sometimes this can wear or break and we can supply this part if you require a new one (Our part SA03-S).

If your tap is leaking from the neck (where the spout meets and joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a suitable silicone grease. The original O'ring kit is known by 3668R 1260R. Our O'Ring Kit includes the Correct sized Allen key to remove the spout.

How To remove the handle: there will be a grub screw on the underside of the handle. If you require an allen key to remove the handle then you can purchase our Allen Key Pack (SK01-S). The handle will then pull off.

How to remove your cartridge - Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

Handle screw is our SS04-S (original part code 133.0440.340)

You can find the WAVE tap / instruction diagram below.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.