Tap Magician compatible spares / parts to repair the Howdens Lamona Roya Kitchen mixer tap TAP3631 TAP3600.

Watch our video below for guidance / how to change your Quarter turn ceramic valves.


If your Roya tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by 3308R / SP3308 hot and cold valve replacements available.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

The Howdens Lamona Roya tap utilises a plastic handle adaptor (SA03) original code 3537R, 3530R, SP3530.

If your Roya tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O Rings inside the spout. Our kit is compatible with the 3527R.

How to remove your Lamona Roya cartridge - Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

You can find the Roya tap diagram/instructions below.

How To remove the handle: Loosen grub screw on the underside of handle using a 2.5mm allen key. Then pull the handle horizontally away from the tap. If you need a replacement handle screw you need our SS04-S

How to replace the spout o-rings: Loosen grub screw on the rear of body using a 2.5mm allen key. Then pull the spout vertically away from the body.