CARRON PHOENIX CRUCIFORM TAP SPARES
Tap Magician replacement Ceramic cartridges to fit the Carron Phoenix Cruciform kitchen tap.

For guidance / instructions of how to replace a tap valve step by step please click here

***Please note this model has changed the cartridge design has changed during production.
This is the cartridge version without a threaded collar.

If you are unsure please get in touch with our customer support team.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3819R, hot and cold valve replacements available.

The cartridge has 20 splines. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

When you remove your cartridge it may come out stuck inside the brass bush (original bush code 3409R).
If the valve is stuck inside the bush you can try to separate them.
If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.
If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1239R.

If O rings dont resolve the leak its possible the spout has tiny pin holes. If you need to replace the complete spout you can purchase our compatible chrome swan neck spout. The Spout comes complete with o rings, aerator and locking nut. Compatible with 1306R/133.0314.654

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome).
Original codes known by 133.0068.762 SP1263 / 1263R. Your original part may have Neoperl stamped around the edge.

We now supply a replacement compatible set of lever handles, these need replacing together as a set.

How To remove the handle and replace the cartridge:
1. You will first need to remove the handle indicator /indice by prising it off.
2. You can then use a crosshead screwdriver to remove the handle retaining screw.
3. Once removed you can then pull the handle away from the tap body.
4. Use 17mm or adjustable spanner to undo cartridge anticlockwise. When you remove your cartridge it may come out stuck inside the brass bush (original bush code 3409R).
If the valve is stuck inside the bush you can try to separate them.
If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.
5. Screw new cartridge (with bush if applicable) in clockwise.
6 Refit Handle.

How do I remove the spout and replace the o rings?
Unscrew locking collar at the base of the spout. Once unscrewed the spout will pull up out of the tap body.
Replace the O rings applying silicone grease to the new o'rings before refitting.

You can find the Cruciform tap diagram/instructions below.
Frequently asked questions about your Carron Phoenix Carneggie tap.

How to identify my Carron Phoenix tap? How to repair my leaking Carron Phoenix Cruciform tap? Spares available for Carron Phoenix Cruciform.
Any further questions contact our experienced technical team.