Compatible Spare Parts for the Franke Athena

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
AthenaQ4-CRClockwise (to open) red1/2" Cartridge 20 x 52mm NTC£11.99 Tuesday
AthenaQ4-ABAnticlockwise (to open) blue1/2" Cartridge 20 x 52mm NTC£11.99 Tuesday
AthenaQ4-PPair (1 x red, 1 x blue)1/2" Cartridge 20 x 52mm NTC£23.98 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Si01-SSingleTap indices set£5.50 Tuesday
SR63C-SSingleAerator chrome£6.60 Tuesday
SR63CB-SSingleAerator brushed chrome£6.99 Tuesday
SK22-SSingleSpout O ring repair kit£5.00 Tuesday
SB34-SSingle34mm TO 1/2" BSP Conversion bush£7.99 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday
SF048-SSingleChrome Plinth£9.99 Tuesday

FRANKE ATHENA TAP SPARES

Watch our video below for guidance on how to change your Quarter turn ceramic valves and Spout O Rings.
The video is of the Franke Zurich tap but the handles remove in the same way on the Athena, and the internal parts are the same.

Tap Magician compatible spares / parts to repair the Franke Athena Kitchen mixer monobloc tap.
Compatible with tap mModels 1463P,115.0311.211,115.0311.215,115.0659.322.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
This is the later version (post 2013) Original spare part codes known by 3819R SP3819 SP3819-H and SP3819-C.

Cartridge has 20 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side,
If you require both then you can select "Pair".

For guidance / instructions of how to replace a tap valve step by step please click here

Your valve may come out stuck inside the brass bush (original code SP3408 / 3408R / 133.0069.391).
If you cannot separate or the tap is leaking at the handle joint you will need to purchase together with the new bush.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1239R SP1239.

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge.

Replacement tap chrome base ring / plinth available in chrome (compatible with 133.0068.833).

You can find the Athena tap instructions diagram below.
How to remove the handle: First remove screw cover on the end of the handle.
We supply replacement indices should you break or damage these.
Use appropriate screwdriver to remove screw holding handle in place. The handle will then pull off.


Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.