Tap Magician compatible spares / parts to repair the Howdens Lamona Adra TAP3541 and TAP3542 kitchen Mixer Lever tap

Watch our video below for guidance / how to change your Quarter turn ceramic valves.


If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by 3547R, hot and cold valve replacements available

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1239R

If you need a whole new replacement spout our spout is compatible with 1375R / SP1375 (ours has a plain aerator on the end of the spout) Available only in chrome.

Replacement aerator insert (compatible with insert from 1317R)

How to remove the handle: Loosen grub screw on the underside of handle using a 2.0mm allen key (SK01-S). Once this is undone the handle will pull off.

How to replace the spout o-rings: Whilst holding body unscrew the spout locking collar then pull the spout vertically away from the body.

You can find the Adra tap diagram/instructions below.


Cartridges can be known by glands, inserts, ceramic disk valve