Compatible Spare Parts for the Blanco Eye BM5300

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
EyeTA-CRClockwise (to open) red1/2" Cartridge For Blanco 28£11.99 Today
EyeTA-ABAnticlockwise (to open) blue1/2" Cartridge For Blanco 28£11.99 Today
EyeTA-PPair (1 x red, 1 x blue)1/2" Cartridge For Blanco 28£23.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SB24E-SSingleAdaptor Bush for Blanco Eye£19.99 Today
SK59C-SSingleChrome Handle Pair£32.00 Today
SK59CB-SSingleSatin/Brushed Handle Pair£36.00 Today
SR22X-SSingleAerator chrome F22x1 12 L/Min£6.99 Today
SS04-SSingleM5 handle grub screw£3.00 Today
SK16-SSingleSpout O'Rings Kit£4.99 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today
SF048-SSingleChrome Plinth£9.99 Today

BLANCO EYE BM5300 TAP SPARES
Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.



Replacement spares to fit the Blanco EYE BM5300CH / BM5300 Kitchen Mixer tap.

If your tap is leaking/dripping out of the end of the spout then you need to replace the tap cartridges.

Our parts are fully compatible with original coding 002545 / 002544.

Please be aware that your cartridge may come out stuck inside the brass bush (see second Image above).
If this comes out stuck to the cartridge then you need to separate the cartridge from the bush. We do not supply this bush.

If your tap is leaking where the spout joins the tap body / tap block, then you need to replace the O Rings inside the swivel spout.
We supply the 2 compatible O'Rings for this but cannot supply the plastic washer inside the spout.

Replacement screws available: SS04-S (for handle) and SS14-S (for Spout).

If you require a new antisplasher / aerator this is our part SR22X-S.

How to remove handle:
Use 2.5mm Allen key to undo grub screw under handle. Pull lever off.
You may need to use some force as corrosion can make them difficult to remove.
Once removed the valve cover / shroud unscrews anticlockwise.

How to replace the spout o-rings:
Use 2.5mm Allen key to undo grub screw at the back of the spout then pull the spout away from body.

How can I remove the adaptor bush which has come out attached to my cartridge?
You can watch our video below if you need help with separating your adaptor bush.

You can find the Eye tap / instruction diagram below.


Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.