Compatible Spare Parts for the Clearwater Camillo

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
CamilloTA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£9.99 Tuesday
CamilloTA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£9.99 Tuesday
CamilloTA-PPair (1 x red, 1 x blue)1/2" Cartridge x 28 x 54mm£19.98 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR63C-SSingleAerator chrome£6.60 Tuesday
SR63CB-SSingleAerator brushed chrome£6.99 Tuesday
SB27-SSingle27mm adaptor bush£7.94 Tuesday
SK18-SSingleSpout O Ring Repair Kit£5.60 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
SH59C-SSingleChrome Handle Compatible 3529R£16.00 Tuesday
SH59CB-SSingleBrushed Nickel Handle Compatible 3529R£18.00 Tuesday
ST17-SSingle17mm spanner£6.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday

CLEARWATER CAMILLO TAP SPARES

Watch our video below for guidance / how to change your quarter turn ceramic valves.




Tap Magician fully compatible spares for the Clearwater Camillo tap kitchen Mixer Lever tap.
If your tap is leaking/dripping out of the spout then it is time to replace the cartridges.
Our cartridge is compatible with the original 3561R coded cartridge.

When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve.
If the valve is stuck inside the bush you can try to separate them.
If you are unable to separate the valve from the bush then you will need to purchase a replacement. (Bush is our code SB27, original code 3868R).

The Camillo cartridge has 28 splines.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side,
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1260R. Replacement O'ring code SK18.

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762 SP1263 /1263R. Your original part may have Neoperl stamped around the edge.

Clearwater Camillo replacement handle levers available in brushed or polished chrome.
Please note our SH59C/CB handles do not have H and C marked on them, they are plain.

Clearwater Camillo Frequently asked questions

How to I remove the Camillo tap handle/ lever?
Use 2mm allen key to undo handle. The grub screw is located on the underside of the handle.
You can pull the lever forwards to access the screw at the back if you need more space.

How do I know if need the adaptor bush?
Until you remove the cartridge from the tap you will not know if you need this part. This is because sometimes the bush gets corroded to the tap and remains in the tap body, and other times it comes out corroded to the tap cartridge.

Can I remove the adaptor bush from the old cartridge?
Yes you can but it can be very hard to remove due to corrosion. You can try using very hot water, followed by cold water over it, to help break the corrosion seal. The bush unscrews from the cartridge anticlockwise. You will likely need to use some grips or put it in a vice to remove it. If you cannot separate it you will need to replace the bush.

How do I remove the spout and replace the O'rings inside the spout?
Use 2.5mm allen key to undo grub screw at the back holding the spout in place.
Pull spout up and out of the tap body. You can watch our how to video above.

What size spanner do I need to remove the Franke Olympus tap handle?
You will need a 17mm or an adjustable spanner.

Our spare parts are premium quality designed for long life use. Easy to replace without the need of a plumber.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.