Compatible Spare Parts for the Franke Krios

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
KriosTA-CRClockwise (to open) red1/2" x 28 x 54mm£9.99 Today
KriosTA-ABAnticlockwise (to open) blue1/2" x 28 x 54mm£9.99 Today
KriosTA-PPair (1 x red, 1 x blue)1/2" x 28 x 54mm£19.98 Today
KriosTA-PWBPAIR WITH SB27 BUSH1/2" x 28 x 54mm£34.97 Today
KriosTA-AH06CCold Valve and Chrome HANDLE1/2" x 28 x 54mm£19.99 Today
KriosTA-CH06CHot Valve and Chrome HANDLE1/2" x 28 x 54mm£19.99 Today
KriosTA-AH06CBCold Valve and Brushed Steel HANDLE1/2" x 28 x 54mm£19.99 Today
KriosTA-CH06CBHot Valve and Brushed Steel HANDLE1/2" x 28 x 54mm£19.99 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK19-SSingleO Ring Tap Repair Kit£6.00 Today
SB27-SSingle27mm adaptor bush£7.94 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
SL50-SSingleRegin Grease 50ml£9.99 Today


Tap Magician replacement ceramic disc cartridge to fit the Franke Krios J spout kitchen mixer tap.
Suitable for Chrome/Smokey Mirror/Matt Black/Brass/Graphite tap versions.

The Franke cartridge may be known by the following spare part codes 133.0438.152, F1427R, 1427R.
The Brass bush is known by codes 133.0312.538, 3868R
The O'ring kit is known by original part codes 133.0069.083, 1425R. Please note the screw supplied many not be compatible with your model

When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.